Erickson Foundation Solutions Before & After Photos

This homeowner in Belmont, Massachusetts had been experiencing water entering their basement during heavy rains. The homeowner uses the basement as a storage area and doesn't want to have the water start ruining belonging or the finished side of the basement. They decided to call EFS for a free inspection. 

Crew Lead Chippy Cortijo and his team arrived at the home and installed the NexusPro and Sani Dry into the basement. 

A homeowner in Belmont, Massachusetts had sunken and uneven concrete slabs. She reached out to Erickson Foundation Solutions to fix the unappealing look and tripping hazards.

Our Design Specialist, Tom Armano, recommended installing PolyLevel concrete stabilization and NexusPro joint repair. PolyLevel is a polyurethane foam that was injected underneath the concrete slabs to fill voids. This lifts and levels the concrete. Then, NexusPro was used to seal the joints. This prevents future cracking and settling.

Now, this homeowner has an appealing walkway that is safe to walk on!

This homeowner in Canton, MA was tired of having an unsightly tripping hazard on their stamped concrete patio. Over the years, the concrete had gradually been settling at one of the joints. The void beneath this section of the concrete needed to be filled in order to raise it back up. Tearing out and replacing a section of stamped concrete would be time consuming and costly, so our PolyLevel process was the ideal solution for this homeowner. The repairs took less than a day, and the homeowner was able to reuse their patio within minutes.  

After installation, the tripping hazard had vanished, and the joints were sealed to prevent further water from flowing beneath the slab.  The white resiude will be washed away and cleaned before our crew leaves for the day, leaving the homeowner with a fixed and clean patio.

A homeowner in Canton, Massachusetts had a pool deck with sinking concrete. This caused the pool deck to become uneven, creating tripping hazards. The homeowner didn't realize that this was an issue that could be fixed until learning about our PolyLevel product. Eager to have this quick and permanent solution installed, she reached out to Erickson Foundation Solutions.

Our Design Specialist, Jim Meglio, recommended installing PolyLevel and NexusPro to lift and level the aggregate concrete while also preventing cracks and settling in the future. Our installation crew injected the polyurethane foam underneath the slabs, which filled voids that had expanded over the years. With the voids filled, the concrete is instantly lifted, and our installation crew then levels the concrete. With the concrete adjusted, the plastic joint sealant strips had to be removed. We then installed NexusPro seal the joints.

The pool area is now a safe space with the concrete repair completed.

This homeowner in Windham, NH had a crack in their foundation wall, which had been patched over the years, but still let in moisture. They needed a more permanent fix. We sealed the crack with a polyurethane injection, which expands inside the crack as a foam and reaches far into the cravice to prevent the water from coming through. The surface of the crack is then coated with an epoxy to add an extra layer of protection. This two part system guarantees no further moisture will come in through the foundation crack.