Radon Gas Mitigation Before & After Photos

A resident in Bedford, New Hampshire recently purchased their home. They had an inspector do a walkthrough of their home after the purchase. The inspector tested for radon in the home and the levels were above 4.0 pCi/L. The homeowners called EFS for us to install and set up an appointment with our Design Specialist and they designed a system for the home. Our team then installed the system in the home and retested the levels to make sure they were below 4.0 pCi/L. 

This homeowner in Tyngsboro, Massachusetts go their basement tested for radon. The test came back at 14.3 pCi/l and then retested in an alternate location at 12 pCi/l. Design Specialist Michael Bierdrzycki came to the home and proposed a radon mitigation system that would reduce the amount of radon in their basement to a healthy level. Crew Lead Nick Carelli and his team came to the home and had the radon system installed within a couple of hours.

John A. of Tyngsboro, Massachusetts was experiencing some floor cracks in their basement. They decided to call EFS to see what was causing these floor cracks. Design Specialist John Prince came to the home and inspected the basement and the area surrounding the foundation. He found that there was no real threat of foundation damage from the surrounding area. John P. suggested getting a radon test done in the basement to see if the radon levels are high. The radon test was done in the basement and the levels came back more than the recommended amount. 

Design Specialist Branden Edwards and his crew came to the home to install a custom Radon Mitigation System. 

John A. was happy with the results of the project.

This homeowner in Litchfield, New Hampshire is moving into their new home and would like to have a radon mitigation system installed. The homeowner has two children. The radon levels in the home are 3.7 pCi/L. The homeowner decided to call Erickson Foundation Solutions about a free inspection.

Design Specialist Isaac Hernandez arrived at the home and inspected the basement to design a radon mitigation system for the home.

Crew Lead Branden Edwards and his team arrived at the home and installed the radon mitigation system into the basement. 

Enda Q. of Lincoln, Massachusetts was experiencing moderately high radon levels in his basement. He wanted to see if someone could come out and inspect his home for radon so he decided to call Erickson Foundation Solutions for a free inspection. 

Design Specialist Chris Greenwood came to the home and inspected the basement and left a radon test kit to test for radon over a 24 hour period. Chris came back in the following days to get the reading from the radon test kit. He found that the results of the test were at 9.8 pCi/L which is fairly high. Chris proposed a custom Radon Mitigation system for the home.

Crew Lead Branden Edwards and his team came to Enda's home and installed the Custom Radon Mitigation System into the home.