Radon Gas Mitigation Before & After Photos

A homeowner in Goffstown, New Hampshire had a radon mitigation system designed for treating water but lacked a system to prevent radon gas from entering the home. Despite a test result of 2.6pCi/L, within acceptable limits, they sought to guarantee their family's safety, particularly as the basement served as a workout area. Consequently, they contacted Erickson Foundation Solutions, known for our reliable and quality services.

Our Design Specialist, Josh Phillips, recommended installing our radon mitigation system with a fan moisture guard and muffler. The crew started work on the project by creating an extraction point into the foundation floor. At this stage, a radon vent pipe was affixed and extended outside the home, with the radon fan mounted on the side. Additional radon pipes were then attached to the fan, extending up the exterior wall and over the roofline to prevent radon re-entry. After confirming the fan's functionality, a monometer was installed in the basement to measure any changing radon levels.

The installation of the radon mitigation system ensures that the family is protected from radon gas throughout the entire home, including the basement.

This homeowner in Bedford, New Hampshire, was interested in discussing a Radon Mitigation System to install in their home. The radon levels were tested around 2-3.5 pCi/l. The homeowners want to get that number even lower. Design Specialist Royce Potts came to the home and designed a radon mitigation system for their home. Crew Lead Brendan Edwards and his team came to the home and installed the new Radon Mitigation System and was able to lower the pCi/l.

A homeowner in Bedford, New Hampshire had purchased their home about 6 months ago. Since purchasing the home they have become aware of radon and wanted to test their home. They decided to call EFS for a free inspection. Our Design Specialist dropped off a 48-hour CRM test kit before the appointment with the homeowners. Once the test was complete our Design Specialist came back to the home to review the results with the homeowners. The results averaged around 7 pCi/L so our DS recommended installing a radon mitigation system in their home. 

A resident in Bedford, New Hampshire recently purchased their home. They had an inspector do a walkthrough of their home after the purchase. The inspector tested for radon in the home and the levels were above 4.0 pCi/L. The homeowners called EFS for us to install and set up an appointment with our Design Specialist and they designed a system for the home. Our team then installed the system in the home and retested the levels to make sure they were below 4.0 pCi/L.