Radon Gas Mitigation Before & After Photos

Michael T. of Beverly, Massachusetts had a neighbor that recently got tested for radon. The radon in the neighbors home was high so the neighbor urged Michael to test his home as well. Michael called Erickson Foundation Solutions to see about a free inspection.

Design Specialist Kenny Calabrese came to the home and inspected and left a radon test kit to test the levels of radon in the basement. Kenny came back and got the results from the radon test and found that the levels are around 45 pCi/L. Kenny Designed a custom radon system for the home.

Crew Lead Branden Edwards and his team came to Michael's home and installed the radon mitigation system. 

Before and after view of the exterior fan and vent of an active radon system, located in Rowley, MA.

This homeowner in Lee, New Hampshire was experiencing radon levels between 8-9 pCi/L. The homeowners decided to call Erickson Foundation Solutions about a free inspection. 

A Design Specialist arrived at the home and recommended installing a radon system with 2 extraction points and sealing a couple of long cracks on the foundation wall and the basement floor. 

Crew Lead Branden Edwards and his team arrived at the home and installed the radon mitigation system and sealed the cracks in the basement. 

This homeowner in New Durham, New Hampshire had gotten a radon test done at their home. The results came back at 19.8 pCi/L, which is very high. Design Specialist Jason Vachon came to the home and figured out where to install a new Radon Mitigation System. Crew Lead Branden Edwards and his team came to the home and installed a new Radon Mitigation System based on Jason's drawing. 

This homeowner in Newburyport, Massachusetts needed a radon mitigation system to help reduce the levels in their home. Design Specialist John Prince designed the most effective system, and Crew Lead Scott Crandall and his team installed the radon mitigation system in one day.