Erickson Foundation Solutions Before & After Photos

A new homeowner in Marlborough, Massachusetts just purchased their home. A radon test was performed after purchase during the inspection process. The test indicated the levels are 4.3 pCi/L and they would like to reduce the radon in their home. Design Specialist Michael Biedrzycki went to the home to talk to the homeowner about their options. Scott Crandall his team then installed the radon mitigation system into the home.

Greg B. of Marlboro, Massachusetts was experiencing settling on the backside of their house. Behind the home is a retaining wall that is holding the soil that is holding the home in place. Greg thinks the settling in the backyard is causing cracking in his garage. He called Erickson Foundation Solutions to see if they could send someone out to inspect his home. 

Design Specialist John Prince came to Greg's home and inspected the garage and the backyard. He confirmed Greg's suspicions of settlement in the backyard. John proposed to stop the settlement they install Push Piers in the back of the home and then after those are installed they seal the cracks, PolyLEVEL, and Resurface the whole garage. 

Crew Lead Chris Hanlek and his team came to the home and installed the PolyLEVEL, Crack Seal, and Resurface. 

A resident of Marlborough, Massachusetts noticed water seeping into their basement through the walls and floors in one corner. The homeowners contacted EFS for a complimentary inspection of their basement to discover a solution for their water-related issues. Our Design Specialist/ Service Technician, Justin Colin, suggested installing CleanSpace and WaterGuard in the basement to prevent any further water penetration.

A homeowner in Marlborough, MA discovered a leak in their passive radon system emanating from the roof. Upon further examination, they retested their home for radon levels and found them to be at 18 pCi/L, significantly exceeding the safe limit of 4.0 pCi/L. Recognizing the danger posed by this harmful gas, they reached out to Erickson Foundation Solutions for assistance.

The installation of our radon mitigation system began with the creation of an extraction point in the foundation. We then secured PVC piping to this point and extended it to the outside of the house. On the exterior, a radon fan was installed to draw radon from the ground beneath the foundation. We added more PVC piping to the fan, extending it above the roofline to safely release the gas away from the house.

The homeowners were elated to have a durable, high-quality solution implemented.

In Marlborough, MA, this new home's building process hit a snag when the homeowner noticed the cinderblocks supporting the supplemental beam in the crawl space just weren't going to cut it. They turned to us for help. As you can see in the 'before' photo, the original setup was precarious at best. Enter our solution: the SmartJack system. These photos tell a story of transformation, showcasing the newly installed SmartJack and supplemental beam in the 'after' picture. We didn't just fix a problem; we provided peace of mind and a sturdy foundation for this new home to rest upon.