Revere, MA Foundation Repair & Radon Mitigation Specialists

When the folks at a busy Dunkin Donuts in Revere, MA, noticed the concrete in front of their entrance door had sunk, they knew they had a problem that could not only deter customers due to the evident trip hazard but also was not synchronizing with their commitment to being accessible to everyone, including those needing handicap access. Understanding the gravity of the situation, they reached out to us at Erickson Foundation Solutions concerned about the inconvenience it was causing their patrons and looking for a quick, effective fix.

After the call, we promptly scheduled a visit where our System Design Specialist John Prince went out to inspect the site. The analysis was clear: the sinking concrete needed a durable, long-term resolution that wouldn't disrupt the business's daily operations. PolyLevel, an advanced polyurethane injection system, was recommended as the go-to solution for this repair. It was ideally suited for the job given its rapid curing time and minimal impact on the surrounding area – essential for any business, especially one as fast-paced as this Dunkin Donuts. Following the consultation, our production team, combined of knowledgeable foreman Tyler Oslizlo and skilled installers, got to work. They precisely lifted and leveled the troughed concrete slab in front of the entrance, solving both the tripping hazard issue and smoothly reinstating access for people with disabilities. The project was conducted efficiently, ensuring the business could continue as usual without any disruption.

Thanks to PolyLevel's innovative solution and the team's proficiency, not only was the problem resolved but the entrance was restored promptly with virtually no inconvenience to the store or its customers. We take pride in leaving Dunkin Donuts with a safer, more welcoming entryway — a testament to Erickson Foundation Solutions’ commitment to providing remarkable customer service.

A homeowner in Revere, Massachusetts, has lived in their home for about a decade and has noticed in the past few years that the floors don't seem to be supported well. They have noticed some sagging and separation of the floors and supports. They had an engineer look at their floors and they recommended supplemental beams to be installed into the basement. They decided to call EFS to come to the home and find a solution to their problem. Our Design Specialist Kenny inspected the home like the engineer and recommended replacing the supports in the basement with our SmartJacks and installing supplemental beams to add support to the floor system. 

Our installation team began by setting up temporary posts around the basement so we could remove the old supports. Once the temp supports were installed the team began removing the old supports. To begin installing our SmartJacks our team first chipped out a small section of concrete where we will install our footing under the slab and extend the post up with enough room to install our adjustable U bracket and supplemental beam. The team installed a total of 8 SmartJacks and 50 feet of supplemental beam into the basement. Once everything was prepared, the team then used the adjustable top to lift and add support to the floor system. After the floor was secured the team then poured new concrete over each of the SmartJack footings to lock them into place. 

The homeowners were impressed with the results of the project. Their floors were no longer sloping and separating.

This homeowner in Revere, Massachusetts has this home that has been in the family since it was built. The homeowners' grandfather had installed a trench to drain water in the basement. The home was built in the 1880s and the trench that the homeowners' grandfather had installed is not working as well as it once did. The homeowners decide to call EFS for a free inspection. 

Design Specialist Isaac Hernandez inspected the basement. Isaac recommended installing a Super Sump, Freeze Guard, and a SaniDry into the basement. 

Crew Lead Gilberto Cortijo and his team installed the Super Sump, Freeze Guard, and a SaniDry into the basement. 

This homeowner in Revere, Massachusetts had been experiencing water in their basement. There was a considerable amount of damage from the last flood in the basement. This home has been in the family since it was built in the 1880s. They decided to call EFS for a free inspection.

Design Specialist Isaac Hernandez inspected the basement. Isaac recommended installing a Super Sump with battery backup, Freeze Guard, and a Sani Dry.

Crew Lead Anthony Rivas and his team arrived at the home and installed the Super Sump with battery backup, Freeze Guard, and Sani Dry into the basement. 

This homeowner in Revere, Massachusetts is planning on remodeling the entire basement. They have noticed that the slab in the basement has been sinking for about 3-4 years. Before they start remodeling they want to address the obvious sinking of the slab. They decided to call EFS for a free inspection. 

Design Specialist Isaac Hernandez inspected the slab in the basement. Isaac determined that some areas have sunk about 2-3". He recommended injecting PolyLevel through the slab to attempt to lift and level the basement floor.  

Crew Lead Nick Melo and his team arrived at the home and began injecting PolyLevel in a grid pattern to lift and level the slab. 

This homeowner in Revere, Massachusetts was experiencing the slab in their basement sinking. They noticed that the slab wasn't lining up with the baseboard anymore.  They decided to call EFS for a free inspection. 

Design Specialist Isaac Hernandez arrived at the home and inspected the basement and found that in some places the slab had sunk about 2-3". Isaac recommended injecting PolyLevel to lift the slab. 

Crew Lead Nick Melo and his team arrived at the home and were able to inject PolyLevel underneath the slab. Nick was able to lift the slab back up to the baseboard using PolyLevel.

This homeowner in Revere, Massachusetts was experiencing some water in their basement. They decided to call EFS for a free inspection. 

Design Specialist Scott Callaway arrived at the home and inspected the basement. Scott recommended installing a Triple Safe Sump Pump and an Ice Guard in the basement.

Crew Lead Nick Carelli and his team arrived at the home and installed the Triple Safe Sump Pump and Ice Guard into the basement.

Mario C. of Revere, Massachusetts was going to redo the floors in his finished basement. He had previously noticed that some areas of the basement felt lower than others. He wanted it checked out. Mario decided to call Erickson Foundation Solutions for a free inspection. 

Design Specialist John Prince arrived at the home and inspected the basement. John discovered that all four corners of the basement were sinking and the center of the slab had some void that needed to be filled. John proposed a solution to Mario. The solution was to lift the four corners and fill the void in the center of the slab using PolyLevel.

Crew Lead Nick Melo and his Installation Specialist Tyler Oslizlo arrived at the home and followed John's plan. Nick and Tyler used PolyLevel to lift the four corners. After the corners were lifted they filled the void in the center of the slab.