Licenced Foundation Repair, Radon Mitigation Company Serving Essex County, MA

A homeowner in Middleton, Massachusetts, who was recently diagnosed with lung cancer, decided to ensure their home was safe from radon, a harmful gas that can seep into the house from the soil. Seeking a company known for quality work and effective radon mitigation, they contacted Erickson Foundation Solutions. We offer comprehensive radon mitigation services, including free in-home consultations and customized solutions to reduce radon levels.

Our Customer Care team arranged for Nikki Burke, our experienced System Design Specialist, to meet with the homeowner. After a complimentary home inspection, Nikki pinpointed the best location and method for installing the radon mitigation system and provided a quote the same day. Nikki's impressive demonstration of the installation process and the system's benefits convinced the homeowner to go ahead with the installation. On the day of installation, our crew met with the owners to walk them through the project's steps. The installation started by drilling a 3-inch hole in the foundation to create a radon suction point. PVC piping was then attached to this point, extending to the exterior of the home where the radon fan would be installed. Once the fan was securely attached to the home's exterior, additional PVC piping was installed to extend the vent above the roofline. With the system now fully operational, it can effectively extract radon-laden air from beneath the foundation, channel it through the piping, and safely release it above the home.

Our installation crew ensured the home was left spotless, almost as if we were never there. After completing the installation, foreman Mike Lyall conducted a final walkthrough with the homeowner, confirming the quality of the work and addressing any remaining questions about the installed system. The homeowner now has peace of mind knowing their family is protected from radon gas.

A homeowner in Middleton, Massachusetts, had lived in their home since 1984 and had seen the basement flood whenever there were heavy rains. They found a couple of inches of water in their basement and their old sump pump couldn't keep up with the water. The homeowner was planning on selling the home this year and wanted to stop the basement from flooding and improve the overall look of the basement before they put the home on the market. The homeowner called EFS for a free inspection of their basement. Our Design Specialist Liam inspected the basement and recommended installing a full perimeter drainage system complete with a TripleSafe Sump to address the water issues, and then recommended installing BrightWall to the walls in the basement to lighten up the space and make it look nicer. 

Our installation team began by chipping out concrete in the basement so they could fit our new TripleSafe basin and our WaterGuard around the perimeter of the basement. Once the team chipped out the concrete for the sump pump and perimeter drainage, the team began to install the sump and its plumbing. We set the TripleSafe into the basin and then plumbed the system to the exterior of the home where we installed an IceGuard and a 10' exterior drainage line. After the sump was installed the team then moved on to installing the BrightWall to the walls of the basement. The team measured each piece of BrightWall and installed each one onto the wall and made sure the bottom was resting where the WaterGuard will be installed. This will make sure any water that enters the wall will enter the perimeter drainage system. After the BrightWall was fully installed the team then moved on to installing the WaterGuard. The team installed 150' of WaterGuard around the perimeter of the basement. Once the drainage was installed the team performed a water test to make sure any water that enter the drainage will run to the sump pump. After the water test, the team then mixed up concrete and poured concrete over the WaterGuard and around the base of the TripleSafe to protect the products. 

The homeowner was very pleased with the results of the project and now is confident with their home to put it up for sale. 

A homeowner in Middleton, Massachusetts, recently called their garage repair company to see about fixing a gap between their slab and the garage door. When the garage tech looked at the garage door he found that it was level. It was actually that the slab wasn't level. The homeowner called EFS to schedule an inspection.

Our design specialist looked at the garage and found that it had sunk. The design specialist recommended leveling the garage slab using PolyLevel. 

Our production team injected PolyLevel and NexusPro into the garage slab to lift, level, and seal the cracks.  

This homeowner in Middleton, Massachusetts was concerned with the radon levels in the basement of their recently purchased home. The radon levels in their home are around 10 pCi/L, which is high. The homeowners decided to call EFS for a free inspection. 

Design Specialist Michael Bradley inspected the finished basement. Michael designed a radon mitigation system to fit in the home. 

Crew Lead Dillon Kingsbury and his team arrived at the home and installed the radon mitigation system into the basement. 

This homeowner in Middleton, Massachusetts has been living in his home for 40 years and has noticed a crack in the corner of his basement getting larger over time. The homeowner decided to call EFS for a free inspection. 

Design Specialist Kenny Calabrese arrived at the home and inspected the basement. Kenny recommended installing 4 Push Piers near the corner of his home that is cracked. The cracked corner of his home is caused by the house sinking. 

Crew Lead Scott Crandall and his team arrived at the home and installed 4 Push Piers on the corner of the home.