A resident of Hudson, New Hampshire was experiencing some cracking and sinking of their garage floor. They called Erickson Foundation Solution to see about a repair.
Design Specialist Nate Erickson came to the home and inspected the garage. He found that the garage floor has sunk a considerable amount. Nate recommended that the homeowners have Erickson inject PolyLevel under their garage to fill the void and stop the floor from sinking. Nate also proposed that they try Resurface Pro. Resurface Pro will create a new textured cover to the concrete making it look brand new.
Crew Lead Nick Melo and his crew came to the home first and injected PolyLevel and Crack Seal to fill the void and the cracks.
After, Jon Provost and Cody Gosselin's team came to the home and installed the Resurface Pro on the garage floor.
Before
The garage had cracks and sunk over the years.
PolyLevel Crew Injected PolyLevel to fill Void
Nick and Tyler came to the home and drilled tiny portholes in a grid pattern. Then injected PolyLevel through those portholes under the garage floor to fill the void.
Resurface is Installed and Dried
Crew corrects any imperfections on the floor using a grinder.
After the Imperfections are Removed and the Texture Coat is Applied
After the imperfections are ground out the team will begin putting the texture coat on the garage floor. After the texture coat, the crew now applies the sealant coat.
After the Sealant Coat was Applied, Curing Process Begins
The sealant coat is the final step before the curing process. The curing process will take a couple of days before a vehicle can drive on the surface.
