Basement Waterproofing Photo Album: Water Leaking into Finished Basement, Londonderry, NH

A homeowner in Londonderry, New Hampshire built their home in the early 2000s. The home has a finished basement that recently had water and moisture leaking onto the floors and walls. The water had damaged the basement floor and walls, and the homeowner wanted to find a solution to prevent further damage. The homeowner decided to call EFS for a free inspection of their basement. Our Design Specialist Liam Fitzpatrick met with the homeowner and inspected the finished basement. Liam recommended installing 100 feet of WaterGuard, A TripleSafe, two IceGuards, and a SaniDry Sedona to prevent water and moisture from collecting in the basement.  Our installation team began by chipping out 100 feet of concrete so we could install our perimeter drainage and sump pump. After the concrete was chipped out and the dirt and debris were removed we installed the TripleSafe and WaterGuard. We integrated the perimeter drainage into the sump pump basin and plumbed the system to the exterior of the home. Once plumbed to the exterior of the home we installed our two IceGuards and 10-foot discharge line to carry water away from the foundation of the home. We then buried the discharge line and then returned to the basement to lock the perimeter drainage system in concrete. We poured concrete over the perimeter drainage and around the sump pump basin to lock everything into place. Lastly, we installed our SaniDry Sedona dehumidifier next to the TripleSafe to control the moisture in the basement.  The team cleaned up the basement and yard before taking the homeowner through the final walkthrough. The homeowner was impressed with the system and we answered any questions the homeowner had before we left.