Sump Pump Replacement, Nashua, NH

A homeowner in Nashua, New Hampshire has lived in his home for over 40 years. Several years ago, he noticed that his basement would leak. In order to fix this, he had a sump pump installed. This pump isn't working as it was intended to, resulting in the basement flooding. Looking for a permanent solution keep his basement dry; he reached out to our Erickson team.

Our Design Specialist, John Prince, recommended installing WaterGuard perimeter drainage, SuperSump sump pump, and FlexiSpan crack sealant. Our crew started installing this waterproofing system by chipping our concrete along the border of the basement floor to make space for the WaterGuard drainage. This system captures water at the perimeter of the basement before being exposed to the walls or floor. The water collected then flows to our SuperSump sump pump. A new basin was created for the sump pump to sit in since the previous basin was not in the ideal spot. A feed line was installed connecting the old basin to the new basin in order to allow the new sump system to pump out the unwanted water. Once these systems were installed, they were cemented in place. An exterior discharge line was then installed to the sump pump to direct water safely out of the home. IceGuard was installed to the discharge line to prevent the pipe from freezing, which prevents sump pumps from backing up and flooding. Lastly, FlexiSpan crack sealant was used to seal a large crack in the basement wall. This sealant stops water from making its way through the crack, and is able to adjust to settlement, making it a long-lasting solution.

With the job now complete, crew lead Ryan Champagne went over a final walkthrough with the homeowner. He was thrilled that he would never have to deal with the annoying cleanup process again!