The town of Nashua reached out to us at EFS to come and look at a utility slab in town. The slab was sinking and dirt was now covering the corners of the slab. Our Design Specialist John inspected the slab and recommended using PolyLevel to lift and level it.
Our installation team began by scraping the dirt away from the concrete and then setting up our slab jacks. The team used slab jacks to prop up the slab so we could spray PolyLevel under the slab so we could lift and level it. Once the PolyLevel was sprayed underneath the slab the team removed the slab jacks and cleaned up the job site.
Utility Slab in Nashua
The right side of the slab is sinking and the town of Nashua wanted EFS to lift and level the slab.
Sunken Slab
The corners of this slab were covered with dirt.
Slab Lifted and Leveled
The team sprayed PolyLevel beneath the slab to lift and level it.
Slab Lifted and Leveled
The team lifted the slab out from below the dirt and then cleaned the dirt off of the slab.
