Sunken granite steps
Before view of the sunken granite steps. From this view, clear to see the trim work has separated entirely from the steps, looking very unsightly.
Helical Piers to Lift Granite Steps
After view of the steps raised back into near original position. Helical piers were used, along with PolyLEVEL, to permanently stabilize the granite steps.
Settling Portico
View of the upper section of the portico attached to the steps. Clear to see it is pulling away from the home as the steps settle.
Stabilized Steps and Portico
After raising the granite steps with helical piers and PolyLEVEL, the portico section attached to the steps is back in place, no longer leaning out or pulling away from the main home.
Helical Pier Under Steps Left
View of the helical pier on the left side of the granite steps. A steel beam was used between the pier and the footing of the steps, helping to distribute the weight evenly. PolyLEVEL was also used to fill the voids beneath the heavy steps.
Helical Pier Under Granite Steps
View of the helical pier on the right side of the granite steps. A steel beam was used between the pier and the footing of the steps, helping to distribute the weight evenly. PolyLEVEL was also used to fill the voids beneath the heavy steps.
Sunken granite step with portico
View of the settling granite step, the steps separating from the trim and kickboard under the front door.
Raising Granite Steps with Helical Piers
Helical piers were used to lift the sunken steps back into their original position, noticably closing the gaps between the granite and the trim on the portico.
